Operation Manual

English
37
Delete Channel
Usethedeletefunctionaftercompilingyourchannellistbymoving/swapthechannels.Deleteunwantedchannelsatthe
endofthelist(withchannelnumber).
1. PresstheTV MENUbuttontodisplaytheOSDmainmenu.
2. Press
in CHANNEL menu to select Programme Edit and press OK.
3. Press / to highlight the channel to be deleted.
4. Pressthe red button to delete the channel.
5. PressEXIT to exit the menu.
7.5 Display Information (only in DTV mode)
Youcandisplayadditionalinformationforthecurrentchannel.
1. PressTV MENUtoentertheOSDmainmenu.
2. IntheCHANNELmenupress
to select Signal Information and press OK.
8. Programme Info (EPG – only for DVB-T)
TheElectronicProgramGuide(EPG)isbroadcastbymany,butnotall,programmeproviders.Thecontentscanalso
greatlyvary.
TheEPGshowsadailyoverviewofcurrentorupcomingprogrammeswiththeirrespectivebroadcastingtimes.
1. PresstheEPG button to open the programme info.
2. Usethefollowingbuttonsforchanges:
/ : Togglebetweenchannel/timeoverview(1)andchangethe
date(2)orchannel.
/ : Select channel.
OK: Access selected channel.
INDEX: Gotochannel/timeoverview(1).Press
/ to toggle be-
tween channel and time overviews.
CHANNEL: Thedate(2)changestoCHANNEL.Press
/ to
select the channel with the programmes to be viewed.
Time: CHANNELchangestodate(2).Thewindowagain
displaystheindividualchannels(3)andtheircurrentpro-
grammes(4).
INFO: Displaydetailinformationaboutselectedprogrammes.
yellow but-
ton:
Displayschedule.
red button: Openrecordingwindow(
see “9.3 Programmed Recording
with EPG” on page 39).
blue button: Open remind window (
see “Save Programmes”).
EXIT: ExitEPG.
Save Programmes
EPGallowsyoutosavetheprogrammestart.Theprogrammesaredisplayedintheschedulelist.Inonmode10sec-
ondsbeforeprogrammestartapromtisshownaskingyoutoswitchchannels.Ifnobuttonispressedorifyoupress
to
conrmthechannelisswitched.Press
tostaywiththecurrentchannel.
1. PresstheEPGbuttontoopentheEPG window.
2. PressINDEX and then press
/ toselectCHANNEL(1).
3. InCHANNEL(2)press / to select the channel.
4. Press / to select the desired programme.
5. Presstheblue button.
Overview