Operation Manual
English
42
11.4 PC Picture Settings
IfaPCisconnectedtoyourTVsetandPC is selected as signal source in the PICTURE menu, the item Screen can be se-
lected.Setpositionandsynchronisationfordesktophere.
1. PresstheTV MENUbuttontodisplaytheOSDmainmenu.
2. Select the PICTURE menu.
3. Pressthearrowbutton to highlight Screen and press OK.
4. Pressthearrowbutton toselectthepicturesettingtobechanged:
- Horizontal Pos.(horizontaldesktopposition)
- Vertical Pos. (verticaldesktopposition)
- Size
- Phase (synchronisation)
5. Set the value with the arrow buttons / .
6. PressEXIT to exit the menu and save the changes.
11.5 Change Sound Settings
YourTVsetcomeswith4presetandonemanuallyadjustablesoundsettings(Standard, Music, Movie, Sports and User).
PresstheSOUNDbuttontocyclethroughtheoptions.SelectUsertoaccessyouruser-denedsoundsettings.
Set Audio Mode
1. PresstheTV MENUbuttontodisplaytheOSDmainmenu.
2. Pressthearrowbutton until the menu SOUND is activated.
3. Press to highlight the item Sound Mode.PressOK todisplaythe
menu.
4. Press / to select User. The following items are activated and can
bechanged:
Treble / Bass
5. Press
to access the desired item and set the value with the arrow buttons / .
6. PressEXIT to exit the menu and save the changes.
11.6 Further Sound Settings
• UseBalance to set the sound balance between left and right speaker.
• SelectAuto Volume to adjust different volume, e.g. when changing the channel.
1. PresstheTV MENUbuttontodisplaytheOSDmainmenu.
2. Pressthearrowbutton
until the menu SOUND is activated.
3. Pressthearrowbutton to highlight Balance or Auto Volume.
4.
Balance:
PressOK todisplaythemenu.Press / to set the desired value.
Auto Volume:PressOK to activate/deactivate the function.
5. PressEXIT to exit the menu and save the changes.
12. Current Time and Timer
12.1 Current Time
InDVB-TmodetheTVsetautomaticallydetectsthecurrenttime.InATVmodethecurrenttimecanbesetmanually.
1. PresstheTV MENUbuttontodisplaytheOSDmainmenu.
2. Pressthearrowbutton until the menu TIME is activated.
3. Pressthearrowbutton to highlight Clock.
4. PressOK to access the function.
5. Enter the values such as date with the arrow buttons / .
6. PressEXIT to exit the menu and save the settings.