Operation Manual
English
43
12.2 On Time and Off Time
OnTimeandOffTimedenethetimewhentheTVsetturnsonandoff.Youcandenedifferentperiods.
NOTE:
ThesefunctionsturnyourTVsetonfromstandbymodeorintostandbymode.IfyourTVsetisturnedoffwiththemain
switch this functions is invalid.
1. PresstheTV MENUbuttontodisplaytheOSDmainmenu.
2. Pressthearrowbutton until the menu TIME is activated.
3. Pressthearrowbutton to highlight Off Time or On Time.
4. PressOK to access the function.
5. Pressthearrowbuttonstohighlightandchangethedisplayedfunctions.
OffTime:
- Off Time: Deneifthesettingistobeperformedonceorregularly.Select
between: (Off, Once, Daily, Mon-Fri, Mon-Sat, Sat-Sun or Sun)
- Hour / Minute: Set the off time.
OnTime:
- On Time: Deneifthesettingistobeperformedonceorregularly.Select
between: (Off, Once, Daily, Mon-Fri, Mon-Sat, Sat-Sun or Sun)
- Hour / Minute: Set the on time.
- Mode: DTV - if DVBT antenna is connected / ATV - if external antenna or
cable tuner is connected.
- Channel: Set the channel number that the TV set turns on with.
- Volume: Set the volume that the TV set turns on with.
6. PressTV MENU to exit the menu and save the settings.
12.3 Sleep Timer
YoucansetyourTVsettoautomaticallyturnoffafterapresetperiodoftime.Thesleeptimerisdeletedandmustbeset
againifyouturntheTVsetoffduringsleeptimersetting.SetthesleeptimerintervalbetweenOff and 240 Min.
• RepeatedlypresstheSLEEPbuttonontheremotecontroluntilthedesiredtimeisdisplayed.Themenudisappears
after a few seconds and the TV set turns off after the preset interval.
NOTE: You can also perform this setting in the TIME menu.
12.4 Auto Sleep (Auto Sleep)
WithautosleepactivatedtheTVsetautomaticallyturnsintostandbymodeafternotreceivingasignalfor10minutes.
1. PresstheTV MENUbuttontodisplaytheOSDmainmenu.
2. Pressthearrowbutton
until the menu TIME is activated.
3. Pressthearrowbutton to highlight Auto Sleep.
4. PressOK to on or off the function.
5. PressEXIT to exit the menu and save the changes.
12.5 Time Zone
1. PresstheTV MENUbuttontodisplaytheOSDmainmenu.
2. Pressthearrowbutton
until the menu TIME is activated.
3. Pressthearrowbutton to highlight Time Zone.
4. PressOK.Pressthearrowbuttons / / / toselectthedesiredtimezone.
5. PressEXIT to exit the menu and save the changes.