Operation Manual

VIDEO AND DECODER CONNECTIONS

11.. VViiddeeoo ttaappee ccoonnnneeccttiioonn ((tthhrroouugghh ccooaaxxiiaall ccaabbllee))

* Connect antenna cable plug into the antenna input of your

video cassette equipment. (This is typically marked RF in)

* Connect the RF outpuut of your cassette equipment to the

antenna input of your TV set. You must use co-axial cable for

this.

* Insert a video cassette and press play.

* Choose the channel to be used to view your video cassette

equipments output.

22.. VViiddeeoo ttaappee ccoonnnneeccttiioonn ((tthhrroouugghh ssccaarrtt ccaabbllee))

* Connect the antenna cable plug into the antenna inlet of the

video set.

* Connect the SCART socket of the video tape and scart socket

of the TV set through EURO scart cable.

* Press “AV” button.

33.. DDeeccooddeerr CCoonnnneeccttiioonn

* Connect the antenna cable plug to the antenna inlet of the

decoder.

* Connect the antenna outlet of the Decoder (RF outlet) to the

antenna inlet of the TV set through coaxial cable.

* Ensure the decoder is switched on.

44.. DDeeccooddeerr CCoonnnneeccttiioonn ((tthhrroouugghh ssccaarrtt ccaabbllee))

* Connect the antenna plug to the antenna inlet of the TV set.

* Connect the scart socket of the decoder to the scart socket AV2

of the TV set through EURO scart cable.

* Press “AV” button.

EURO AV

VVIIDDEEOO

DDEECCOODDEERR

065001059200 AL/IN 32" AVI 2/10/06 16:08 Page 36