Instruction manual

English
78
Band
Here you can set the corresponding frequency band.
Position
Here you can select the channel whose settings you wish to change.
Skip
In this menu you can determine whether the current channel should be
skipped when switching over.
 O : The current channel is not skipped.
 On: The current channel is skipped.
Troubleshooting
Before sending the machine to the Customer Services, use the following table to check whether you can rectify the fault
yourself.
Fault Possible cause Solution
The power supply
light does not light
No power supply
WARNING:
Before searching for the fault, please turn the device o .
 During battery operation: check whether the battery is
changed.
 During mains adapter operation: Put the mains plug in
correctly, if necessary, check the socket is working with
another appliance.
no power supply/ mains switch
switched o
Switch the player on by the mains switch (Fig. 2/30).
No image displayed
on screen
During operation with a
television set:
Video cable not correctly
connected
WARNING:
Before searching for the fault, please turn the device o .
Check the correct  t of the Video cable. Make sure that the
jacks are tightly in the sockets.
no DVD/CD inserted Insert a CD/DVD.
DVD/CD not compatible Use only compatible media.
DVD/CD incorrectly placed in
CD/DVD-tray
Turn the CD/DVD around.
CD/DVD is dirty Clean the CD/DVD around.
CD/DVD is damaged Use a di erent CD/DVD.
Incorrect settings Check the settings of your DVD-Player.
The child protection system is
activated
Deactivate the child protection.
The AV IN/OUT switch (Fig.
2/24) is turned to „IN“.
Turn the AV IN/OUT switch to „OUT“.
No response when
pressing button
Power supply problem or static
charging of appliance
Switch o the main switch and pull out the mains plug. Insert
the mains plug into the socket and switch the player on again.
05-CTV 4889_GB.indd 7805-CTV 4889_GB.indd 78 08.09.2008 9:02:42 Uhr08.09.2008 9:02:42 Uhr