Operation Manual

48
31. AUDIO
Repeatedly press the AUDIO button during
playback to select between up to 8 audio
languages.
CAUTION: This function depends on the
DVD.
MP3 PLAYBACK
The following menu is displayed after inserting MPEG or MP3 disc:
The following menu is displayed after inserting MPEG or MP3 disc:
Current
directory
name
The played
file is MP3
A
udio 1 file.
Current
MP3/JPEG file
name.
A JPEG file has
file ending .JPEG.
File changing
area: shows file
type and change.
The played file is
JPEG image file.
Press to select a folder with the cursor
showing in the le window.
Press SELECT to open the selected folder or to
start the selected track.
Press to toggle between folders and tracks
CAUTION
During MP3 playback you have no rewind/fast
forward function.
CAUTION
Under the following conditions the player cannot
playback MP3 CDs: The recording format is not
supported (ensure your les are in MP3 format),
the disc is badly scratched, damaged or dirty or
the disc was not nalized.
DVD Troubleshooting
If you encounter problems with your DVD player,
please rst read the following instructions:
NO IMAGE OR NO SOUND
Ensure the player is switched on.
Ensure your wall outlet is ok. Ensure the
power cord is ok.
Ensure the power cord is connected
properly.
IMAGE BUT NO SOUND
Ensure that the sound is not muted.
Ensure that the audio cable is connected
properly.
WEAK IMAGE OR SOUND
Ensure that the audio cable is connected
properly.
Ensure that your disc is not scratched or
damaged.
BAD DISC IS DISPLAYED
Ensure that your disc is not bent, damaged
or scratched.
Ensure that your disc is not scratched or
dirty.
Ensure that the player supports the disc
format.
Check if you are trying to play a software
CD. If this is the case, please restart the
player.
REMOTE CONTROL DOES NOT WORK
Ensure the player is switched on.
Ensure that the batteries are not exhausted.
Go with the remote control right in front of
the IR sensor of the player.
Remove obstacles between remote control
and IR sensor.
NO FUNCTION AT ALL
Turn the player off and on again.
NO DISC IS DISPLAYED
Ensure that a disc is inserted the correct
way.
Ensure that the disc is inserted properly.
Ensure that your disc is not bent, damaged
or scratched.