Operation Manual

2132
?
I/II
Switching on of TV
1. Remove the battery cover from the remote control unit and install two AAA type batteries
according to the diagram inside the battery compartment. Replace the battery cover.
2. Connect your aerial to the TV set.
3. Connect your TV to a 230 VAC power socket.
4. Switch on your TV with the
switch on the front panel. The red light will be illuminated.
If the screen doesn’t light up, push the button P- or P+ on the front panel of the television,
or any of the keys
∧∧
∧∧
∧
,
∨∨
∨∨
∨
, 0, 1, …, 9 on the remote control.
Notes:
1. After switching the television set on by using
front panel button, the set switches to
the mode, what is set in the line POWER ON of the menu table OPTIONS:
- it turns on the standby mode, if it is selected. In this mode, lights up the red lamp.
- it turns on to the working state, if the LAST STATE is selected and TV was turned of by
using
front panel button from the working state.
- it turns on to the standby mode, if the LAST STATE is selected and TV was turned of by
using
front panel button from the standby mode.
2. When you turn on the TV from the standby mode to the working mode, the red lamp fades
on the front panel of television.
Switching on
Control of TV set by using MENU tables
Your television is controls using the MENU tables SOUND, PICTURE,
VIEW, CLOCK, AUTOSEARCH, MANUAL SEARCH, EDIT, OPTIONS,
PROGRAM
TUNE, which are shown in the screen when you push
RC button OK longer than 2 second. There are written to the separate
lines the titles of the TV parameters and their ways of the tune up and
selection in the MENU tables.
When you push the colour RC buttons, you can go directly to MENU
tables: SOUND - red, PICTURE - green, VIEW - yellow, CLOCK - blue.
MENU table or the line of table in which is written wanting to change
or tune the parameter, is chosen by RC buttons
∧∧
∧∧
∧
,
∨∨
∨∨
∨
, and the active
or regulation of this parameter is done by RC buttons
< or >. The MENU tables have gone from the
TV screen, when you push RC button OK or TV one or two times.
Note: the chosen line in the table is marked by cursor and the text’s colour changes.
MENU
SOUND
PICTURE
VIEW
CLOCK
AUTOSEARCH
MANUAL SEARCH
EDIT
OPTIONS
PROGRAM
TUNE
In Teletext mode press to start the search of displayed page again.
In Teletext mode press to reveal hidden text (e.g. answers). Press again to hide this text.
In the television mode - a key of DUALI/DUALII volume mode selection.
The key which choose the groups of teletext languages.
Page expand key. In Teletext mode, press to enlarge top half of the page. Press again to
enlarge the bottom half. Press again to return to normal size.
When this button is pressed, the number of the program being received, the current time
(if set), status of the shut down timer, settings of fixed picture parameters are shown.
SLEEP Sleep Timer key. Press to set the time after which the TV set automatically switches
into standby mode. Each pressing of the key increments the time by 15 minutes up to 90
minutes. To disable, repeatedly press the key until the set time returns to zero. The set
time is displayed on the screen for a short time after each key press.
Guarantee
The device supplied by our Company is covered by a 24 month guarantee starting
on the date of purchase (receipt).
During the life of the guarantee any fault of the device or its accessories *)
ascribable to material or manufacturing defects will be eliminated free of charge by
repairing or, at our discretion, by replacing it. The guarantee services do not entail
an extension of the life of the guarantee nor do they give rise to any right to a new
guarantee!
Proof of the guarantee is provided by the proof of purchase. Without proof of
purchase no free replacement or repair will be carried out.
For repairs or replacement during the life of the guarantee return the device in its
original packing together with the proof of purchase to your dealer.
*) Damage to accessories does not mean automatic free replacement of the whole
machine. In such cases please contact our hotline. Broken glass or breakage of
plastic parts are always subject to a charge.
Defects to consumables or parts subject to wearing (e.g. motor pistons, kneading
blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc.)
as well cleaning, maintenance or the replacement of said parts are not covered by
the guarantee and hence are to be paid!
The guarantee lapses in case of unauthorized tampering.
After the expiry of the guarantee
After the expiry of the guarantee repairs can be carried by the competent dealer or
repair service against the payment of the ensuing costs.
The device has been tested according to all relevant CE guidelines, such as
electromagnetic compatibility and low voltage directives, and has been
constructed in accordance with the latest safty regulations.
Subject to technical changes without prior notice!