Operation Manual

ENGLISH
41
12. Troubleshooting
Problem Possible Causes
No picture, no sound • No connection to the alterna-
ting current or car adapter.
• Incorrect power supply.
• The switch on the rear of the
set is turned to OFF.
No picture • Ensure that the correct an-
tenna, the correct station and
the correct country have been
selected. It is possible that
you need to perform a new
channel search.
• The station being received
is too weak for reception via
the telescopic antenna. Turn
the antenna or connect an
external antenna.
No sound • The sound is switched off.
• The earphones are inserted.
• The station being received is
too weak.
Mosaic-like picture • The station being received is
too weak. Realign the anten-
na.
No signal • It is possible that the wrong
country has been selected.
• The signal may be too weak.
13. Technical Data
Tuning:
Input encoding:....................................4.98 ~ 31.67 Mbit/s
Demodulation: ...................................................... COFDM
Modulation:............................... QPSK. 16-QAM, 64-QAM
FFT mode:........................................................... 2 K / 8 K
Input:
Input frequency:................. VHF 177.5 MHz ~ 226.5 MHz,
........................UHF 474 MHz ~ 858 MHz
Input voltage:............................................-20 ~ -65 dBmV
Input resistance: ................................................... 75 Ohm
Video Output:
Output resistance: ............75 Ohm, with AV adapter cable
Output voltage: ......................................... 1.0+- 20 mVp-p
Audio Output:
Output resistance: ....................................................... 680
Output voltage: ........................................................-15 dB
General Technical Data
Display device: .........................................colour TFT LCD
Screen size:................................................ 8 inch (20 cm)
Loudspeaker:.............................32mm round loudspeaker
Current consumption: ..................................DC 12V, 18 W
Permitted power consumption:
Two options: 1. Alternating current supply:
alternating current adapter
2. Car battery (12V):
Car adapter
Dimensions:...........................220 mm x 175 mm x 40 mm
Weight: ........................................................ approx. 930 g
Operating temperature: ...................................... 5 ~ 35°C
Storage temperature:....................................... -40 ~ 60°C
Dot matrix: ....................................0.2535 (H) x 0.2535 (V)
Resolution:............................................. 640 x RGB X 480
Response speed (ms): ................................. R: 30 / F: 50
Viewing angle: .................................. U: 50, D: 60, R/L: 60
Contrast:................................................................... 150:1
This device has been tested according to all relevant cur-
rent CE guidelines, such as electromagnetic compatibility
and low voltage directives, and has been constructed in
accordance with the latest safety regulations.
Subject to technical changes without prior notice!
14. Guarantee
The device supplied by our Company is covered by a
24 month guarantee starting on the date of purchase
(receipt).
During the life of the guarantee any fault of the device or
its accessories *) ascribable to material or manufacturing
defects will be eliminated free of charge by repairing or, at
our discretion, by replacing it. The guarantee services do
not entail an extension of the life of the guarantee nor do
they give rise to any right to a new guarantee!
Proof of the guarantee is provided by the proof of
purchase. Without proof of purchase no free replacement
or repair will be carried out.
If you wish to make a claim under the guarantee please
return the entire machine in the original packaging to
your dealer together with the receipt.
*) Damage to accessories does not mean automatic free
replacement of the whole machine. In such cases please
contact our hotline. Broken glass or breakage of plastic
parts are always subject to a charge.
Defects to consumables or parts subject to wearing
(e.g. motor pistons, kneading blades, drive shafts, spare
remote control, spare toothbrushes, saw blades, etc.) as
well as cleaning, maintenance or the replacement of said
parts are not covered by the guarantee and hence are to
be paid!
The guarantee lapses in case of unauthorized tampering.
05-CTV 699 LCD_GB 41 02.09.2005, 11:50:46 Uhr