Operating instructions

g
39
Three pink bands:
Hardness level 3, hard
up to 3.7 mmol/l, or
up to 21° German hardness, or
up to 37.8° French hardness
Four pink bands:
Hardness level 4, very hard
over 3.7 mmol/l or
over 21° German hardness, or
over 37.8° French hardness
Setting and saving the water hard-
ness level
You can set 4 hardness levels. The cof-
fee machine is factory-set to hardness
level 4.
0 Check that the machine is off (all the
indicator lights are off).
0 Press the button and hold it for
at least 5 seconds. The four lights ,
, and come on.
0 Press the button (Fig. 19) repeat-
edly until the number of lights that are
on coincides with the hardness level
(for example, to set hardness level 3,
press the button until 3 indicator lights
come on together, , and ).
0 Press the button to save the
data. The coffee maker is now pro-
grammed to provide the descaling
warning when effectively necessary,
based on the actual hardness of the
water.
10 Meaning of the normal
operation indicator lights
The and indicator lights are
flashing
The machine is not ready to make cof-
fee (the ideal water temperature has
not yet been reached). Wait for the
indicator lights to come on steady
before making the coffee.
The and indicator lights are
on steady
The machine is at the right tempera-
ture and ready to make coffee.
The light is on steady
The machine is delivering one cup of
coffee.
The light is on steady
The machine is delivering two cups of
coffee.
The steam light flashes
The machine is heating to the ideal
temperature to produce steam. Wait
for the light to come on steady before
turning the steam knob.
The steam light is on steady
The machine is ready to deliver steam
and the steam knob can be turned.
The light is on steady
The machine is ready for delivery using
ground coffee (see section 6 „Using
pre-ground coffee“, page 34).
The light is on steady
The automatic descaling program is in
progress (see section 9.4 „Descaling“,
page 37).
11 Meaning of the alarm indi-
cator lights and what to do
when they are on
The light is on steady
• The water tank is empty or is posi-
tioned incorrectly.
0 Fill the water tank as described in sec-
tion 3.2 „Filling with water“, page 31,
and insert it fully.
• The tank is dirty or lined with lime
scale.
0 Rinse or descale the tank.
The light flashes
• The machine cannot make the coffee
and is noisy.
0 Turn the steam knob anticlockwise
(Fig. 8) as described in section 4 „Mak-
ing coffee with beans“, page 32,
note 10.
• The coffee comes out too slowly.
0 Turn the grinding adjustment knob (Fig.
17 ) one click clockwise (section 5
„Adjusting the coffee grinder“, page 34).
822_949_352 CS5200.book Seite 39 Mittwoch, 9. Mai 2007 7:26 19