User manual

13
DE
GR
EN
EN
Troubleshooting
Problem Possible cause Solution
Soleplate is not heating even though iron is
turned on.
Connection problem Check main power supply cable, plug and
outlet.
Temperature control is in MIN position. Selectadequatetemperature.
Iron does not produce steam. Not enough water in tank. Fillwatertank(see“Gettingstarted”,no2).
Steam control is selected in non-steam position. Set steam control between positions of
minimumsteamandmaximumsteam(see
“Ironingchart”).
Selected temperature is lower than that
specified to use with steam.
Select a temperature up to
.
Spray function does not work. Not enough water in tank. Fillwatertank(see“Gettingstarted”,no2).
Steam jet and vertical steam jet function does
not work.
Steamjetfunctionwasusedveryfrequently
within a short period.
Put iron on horizontal position and wait
before using steam jet function.
Iron is not hot enough. Adjust the proper temperature to steam
ironing(upto
).Putironinvertical
position and wait until temperature indicator
light turns o.
ELX12537_IFU_Parana_steamiron_AEG_3lang.indd 13 2009-05-29 15:30:35