Owner's manual

17
D
GR
NL
F
GB
1. Before  rst use. Remove all adhesive
remains and gently rub with a
dampened cloth. Rinse water tank
to remove foreign particles. When
turned on for the  rst time, temporary
vapours/odours may occur.
2. Filling steam iron with water.
Make sure plug is removed from
power outlet. Turn steam selector to
Dry setting and open  lling aperture
cover. Using beaker provided, pour
water up to maximum level. Close
cover.
3. Plug power cable into a power
outlet. Power indicator light turns
on. Set temperature by turning
temperature selector to adequate
choice. When the light turns o , iron is
ready to be used.
8 min
30 sec
30 sec
AB
4.
Using the spray mist and steam
jet function. Ensure that water tank
is at least 1/4 full. Use spray mist to
pre-dampen fabrics by pressing spray
button several times to release a  ne
mist (A). To use the steam jet function,
ensure that tank is at least 1/2 full.
Press steam jet button several times to
prime pump (B).
5. Steaming hanging items. Vertical
steam jet function is ideal for steaming
curtains, suits and delicate fabrics.
Hang item on a hanger, hold iron at a
distance of 10–20 cm and press steam
jet button.
6. 3-way Auto-OFF. If iron is left
unattended on soleplate or on the
side, it turns o after 30 seconds. If left
unattended on the heel, it turns o
after 8 minutes. To turn on, just begin
to iron again.
GB
Getting started
AEG IFU-Parana 5lang.indd 17AEG IFU-Parana 5lang.indd 17 13.03.12 14:3313.03.12 14:33