Operation Manual

22
GB
Troubleshooting
Problem Possible cause Solution
Soleplate is not heating even though iron
is turned on.
Connection problem Check main power supply cable, plug
and outlet.
Temperature control is in MIN position. Selectadequatetemperature.
Iron does not produce steam. Not enough water in tank. Fill water tank (see “Getting started”, no 2).
Steam control is selected in non-steam
position.
Set steam control between positions of
minimum steam and maximum steam
(see “Ironing chart”).
Selected temperature is lower than that
specified to use with steam.
Increase temperature to at least
.
Spray function does not work. Not enough water in tank. Fill water tank (see “Getting started”, no 2).
Steam jet and vertical steam jet function
does not work.
Steamjetfunctionwasusedveryfrequently
within a short period.
Putirononhorizontalpositionandwait
before using steam jet function.
Iron is not hot enough. Adjust the proper temperature to steam
ironing (up to
).Putironinvertical
position and wait until temperature
indicator light turns o.
Brown streaks come out of the soleplate
while ironing and stain the linen.
You have used hard water, which has caused
scale akes to develop in the water tank.
Use the self-clean function one or more
times.
You have used chemical descaling agents. Do not use any descaling agents.
Fabricbreshaveaccumulatedintheholes
of the soleplate and are burning.
Use the self-clean function one or more
times. Clean the soleplate with a damp
soft cloth.
Fabrics might not be properly rinsed or
the garments are new and have not been
washed before ironing.
Pleaserinsethelaundryproperlyagain.