User manual

20
1. Before rst use. Remove all adhesive
remains and gently rub with a
dampened cloth. Rinse water tank
to remove foreign particles. When
turnedonforthersttime,temporary
vapours/odours may occur.
2. Filling steam iron with water.
Make sure plug is removed from
power outlet. Turn steam selector to
Drysettingandopenllingaperture
cover. Using beaker provided, pour
water up to maximum level. Close
cover. This product is appropriate for
use with tap water. It is recommended
to use destilled water or a mix of 50%
destilled, 50% tap water.
3. Plug power cable into a power
outlet.Powerindicatorlightturns
on. Set temperature by turning
temperatureselectortoadequate
choice. When the light turns o, iron is
ready to be used.
4. Using the spray mist and steam
jet function. Ensure that water tank
is at least 1/4 full. Use spray mist to
pre-dampen fabrics by pressing spray
buttonseveraltimestoreleaseane
mist (A). To use the steam jet function,
ensure that tank is at least 1/2 full.
Presssteamjetbuttonseveraltimesto
prime pump (B).
5. Steaming hanging items. Vertical
steam jet function is ideal for steaming
curtains, suits and delicate fabrics.
Hang item on a hanger, hold iron at a
distance of 10–20 cm and press steam
jet button.
6. 3-way Auto-OFF. If iron is left
unattended on soleplate or on the
side, it turns o after 30 seconds. If left
unattended on the heel, it turns o
after8minutes.Toturnon,justbegin
to iron again.
GB GB
GB
A
B
8min
30 sec
30 sec
Getting started