User manual

23
d
GR
NL
F
GB
GB
Cleaning and care
1. Always store iron on its heel rest.
To clean exterior surfaces, use a damp
soft cloth and wipe dry. Do not use
any chemical solvents, as these will
damage the surface. Do not store the
iron with water in the tank.
2. Cleaning the soleplate. Do not use
scouring pads or harsh cleaners on
the soleplate as these will damage
the surface. To remove burnt residue,
iron over a damp cloth while iron is
still hot. To clean the soleplate, simply
wipe with soft damp cloth and wipe
dry.
Troubleshooting
Problem Possible cause Solution
Soleplate is not heating even though iron is
turned on.
Connection problem Check main power supply cable, plug and
outlet.
Temperature control is in MIN position. Selectadequatetemperature.
Iron does not produce steam. Not enough water in tank. Fillwatertank(see“Gettingstarted”,no2).
Steam control is selected in non-steam position. Set steam control between positions of
minimum steam and maximum steam (see
“Ironing chart”).
Selected temperature is lower than that
specified to use with steam.
Increase temperature to at least
.
Spray function does not work. Not enough water in tank. Fillwatertank(see“Gettingstarted”,no2).
Steam jet and vertical steam jet function does
not work.
Steamjetfunctionwasusedveryfrequently
within a short period.
Put iron on horizontal position and wait
before using steam jet function.
Iron is not hot enough. Adjust the proper temperature to steam
ironing (up to
). Put iron in vertical
position and wait until temperature indicator
light turns o.
Disposal
Recycle the materials with the symbol
. Put the packaging in applicable
containers to recycle it.
Help protect the environment and human
health and to recycle waste of electrical
and electronic appliances.
Do not dispose appliances marked with
the symbol
with the household
waste. Return the product to your
local recycling facility or contact your
municipaloce.