User manual

2.
Pull the door trim to the front to re-
move it.
3.
Hold the door glass panels on their
top edges one by one and pull
them upwards from the guide.
4.
Clean the door glass panels.
To install the panels do the above
steps in the opposite sequence. In-
sert the smaller panel first, and then
the larger one.
10.4 Oven lamp
WARNING!
There is a danger of electrical
shock!
Before you change the oven lamp:
• Switch off the oven.
• Remove the fuses in the fuse box or
switch off the circuit breaker.
Put a cloth on the bottom of the
oven for protection of the oven
light and glass cover.
Replacing the oven lamp
1.
You can find the lamp glass cover at
the back of the cavity.
Turn the lamp glass cover counter-
clockwise to remove it.
2.
Clean the glass cover.
3.
Replace the oven lamp with applica-
ble 300°C heat-resistant oven lamp.
Use the same oven lamp type.
4.
Install the glass cover.
10.5 Replacing the oven lamp
1.
The oven lamp is on the left side of
the oven cavity. Remove the left
shelf rail for access to the lamp.
2.
Use a narrow, blunt object (e.g. a
teaspoon) to remove the glass cov-
er. Clean the glass cover.
3.
If necessary, replace the oven lamp
with an applicable 300 °C heat-re-
sistant oven lamp.
Use the same oven lamp type.
4.
Install the glass cover.
5.
Install the left shelf rail.
11. WHAT TO DO IF…
WARNING!
Refer to the Safety chapters.
Problem Possible cause Solution
The oven does not heat
up
The appliance is switch-
ed off
Switch on the appliance
The oven does not heat
up
The clock is not set Set the clock. Refer to
"Setting the clock"
The oven does not heat
up
The necessary settings
are not set
Make sure, the settings
are correct
ENGLISH 25