Operation Manual

MAINTENANCE

CLEANING THE COMFORT PANELS

•PulltheComfort Paneltoopenit.

•Disconnect the panel from the hood canopy by

sliding the fixing pin lever.

•The comfort panel must never be washed in a

dishwasher.

•Clean the outside by using a damp cloth and

neutral liquid detergent.

•Clean the inside as well by using a damp cloth

and neutraldetergent;do not use wet cloths or

sponges, or jets of water; do not use abrasive

substances.

•When the above operation has been completed,

hook the panel back to the hood canopy and close

it by turning the knob in the opposite direction.

METAL GREASE FILTERS

Filters can be washed in the dish machine. They need

to be washed when F-sign appears on the display or

in any case every 2 months, or even more frequently

in case of particularly intensive use of the hood.

Alarm reset

•Switchoffthe hoodandthelights.

•PresstheD-key till the display is unlit.

Cleaning the filters

•Pullthecomfort panelstoopenthem.

•Remove the filters one by one pushing them

towards the back side of the hood unit and si-

multaneously pulling downwards.

•Anykindofbendingofthefiltershastobeavoided

when washing them. Before fitting them again

into the hood make sure that they are completely

dry. (The colour of the filter surface may change

through-out the time but this has no influence

to the filter efficiency).

•Whenfittingthefiltersintothehoodpayatten-

tion that they are mounted in correct position the

handle facing outwards.

•Closethecomfort panel.