Operating Instructions and Installation Instructions

38
Installation – for qualied contractors
13.3 Details on energy consumption
Product data complies with EU regulations relating to the Directive on the ecodesign of energy related products (ErP).
DDLE ÖKO TD 18 DDLE ÖKO TD 18/21/24 DDLE ÖKO TD 27
222396 222398 222399
Manufacturer AEG Haustechnik AEG Haustechnik AEG Haustechnik
Load profile S S S
Energy efficiency class A A A
Annual power consumption kWh 477 477 481
Energy conversion efficiency % 39 39 39
Default temperature setting °C 60 60 60
Sound power level dB(A) 15 15 15
Special information on measuring efficiency None Data at Pmax. Measured with flow restric-
tion on 9 Ltr/min
13.4 Wireless remote control
Model FBM Comfort
Dimensions (H/W/D)
excl. wall retainer
50/50/17 mm
Weight excluding wall retainer 30 g
Radio frequency 868.3 MHz
Range inside building
incl. one separating ceiling
25 m approx.
Temperature setting range 30 °C - 60 °C
Protection level to EN 60529 Shower = IP X5
Bath = IP X7
Battery type CR 2032
13.5 Appliance
DDLE ÖKO TD 18 DDLE ÖKO TD 18/21/24 DDLE ÖKO TD 27
222396 222398 222399
Electrical details
Rated voltage V 380 400 415 380 400 415 380 400
Rated output kW 16.2 18 19.4 16.2/19/21.7 18/21/24 19.4/22.6/25.8 24 27
Rated current A 24.7 26 27 27.6/29.5/33.3 29/31/35 30.1/32.2/36.3 37.1 39
Fuse A 25 25 32 32/32/35 32/32/35 32/32/40 40 40
Phases 3/PE 3/PE 3/PE
Frequency Hz 50/60 50/60 50/- 50/60 50/60 50/- 50/60 50/60
Max. mains impedance at 50Hz Ω 0.379 0.360 0.347 0.284 0.270 0.260 0.254 0.241
Specific resistance ρ
15
≥ (at ϑcold ≤25 °C) Ω cm 900 900 1000 900 900 1000 900 900
Specific conductivity σ
15
≤ (at ϑcold ≤25 °C) μS/cm 1111 1111 1000 1111 1111 1000 1111 1111
Specific resistance ρ
15
≥ (at ϑcold ≤45 °C) Ω cm 1200 1200 1300 1200 1200 1300 1200 1200
Specific conductivity σ
15
≤ (at ϑcold ≤45 °C) μS/cm 830 830 770 830 830 770 830 830
Connections
Water connection G 1/2 A G 1/2 A G 1/2 A
Application limits
Max. permissible pressure MPa 1 1 1
Max. inlet temperature for reheating °C 45 45 45
Values
Max. permissible inlet temperature °C 65 65 65
ON l/min >2.5 >2.5 >2.5
Flow rate for pressure drop l/min 5.2 5.2/6.0/6.9 7.7
Pressure drop at flow rate MPa 0.08 0.08/0.1/0.13 0.16
DHW delivery l/min 9.9 9.9/11.6/13.2 14.9
Δϑ at DHW delivery K 26 26 26
Hydraulic data
Rated capacity l 0.4 0.4 0.4
Versions
Connected load options - X -
Temperature adjustment °C 30-60 30-60 30-60
Insulation block Plastic Plastic Plastic
Heating system heat generator Bare wire Bare wire Bare wire
Cap and back panel Plastic Plastic Plastic
Colour white white white
IP-Rating IP25 IP25 IP25