Operating Instructions and Installation Instructions

26
Operation – for users and qualied contractors
4. Operation
4.1 Operation and displays on the appliance
26_02_02_0892
Temperature display
Bar graph indication of the output
Second display for example time
Memory keys 1 and 2
INFO and ECO key
ECO display
Rotary selector for temperature selection
Display range for additional information:
Backlighting
Display range for:
Wellness, automatic water volume control,
ECO, childproofing, second display, clock
Service, error
Display range for:
“Wellness” “Automatic water volume control” “Orientation light”
“ECO” mode “Child-proof system”
“Second line” “Clock”
Display area for additional information; notify your contractor if these symbols are shown.
“Error”; see chapter “Customer service mode”
“Service”; see chapter “Customer service mode”
4.1.1 Temperature setting
Operation Display indication
» Temperature selection 30 ... 60 °C, infinitely
adjustable.
For example 43 °C.
OFF = heating is switched OFF.
4.1.2 Allocating memory keys
» Set the required temperature to be saved
30 ... 60 °C.
For example 38 °C.
» Hold down key 1 or 2 for three seconds. For example 38 °C and 43 °C.
Display flashes briefly once; temperature is saved.
4.1.3 Scanning memory keys
» Hold down key 1 or 2. For example 38 °C and 43 °C.
4.1.4 Selecting / deselecting ECO
» Press ECO: Select ECO. , green LED illuminates.
» Press ECO: Deselect ECO. No ; LED does not illuminate.
4.2 INFO menu settings
INFO menu settings
Operation Display indication: Appliance as factory-set
» Hold down ECO for three seconds. 38 °C
All settings in the INFO menu are immediately accepted.
Exit the menu
» Hold down ECO for three seconds. Selected settings.
You exit the INFO menu if no key is pressed for approx. 40 seconds.