Operating Instructions and Installation Instructions
27
Installation - for contractors
15.8
DDLT PinControl 13 DDLT PinControl 18 DDLT PinControl 21 DDLT PinControl 24
222384 222385 222386 222387
Rated voltage V 400 400 400 400
Rated output 400 V stage I min. kW 4,6 6,3 7,4 8,3
Rated output 400 V stage I max. kW 10,6 14,3 16,8 19,0
Rated output 400 V stage II min. kW 6,8 9,2 10,8 12,2
Rated output 400 V stage II max. kW 13,3 18,0 21,1 23,8
Rated output kW 13,5 18 21 24
Rated current A 19,5 26 31 35
Fuses A 20 25 32 35
Phases 3/PE 3/PE 3/PE 3/PE
Frequency Hz 50 50 50 50
Specific resistance ρ
15
≥ (at ϑcold ≤25 °C) Ω cm 900 900 900 900
Specific conductivity σ
15
≤ (at ϑcold ≤25 °C) μS/cm 1111 1111 1111 1111
Versions
IP-Rating IP25 IP25 IP25 IP25
Protection class 1 1 1 1
Insulation block Plastic Plastic Plastic Plastic
Heating system heat generator Bare wire Bare wire Bare wire Bare wire
Connections
Water connection G 1/2 A G 1/2 A G 1/2 A G 1/2 A
Max. permissible pressure MPa 1 1 1 1
Max. permissible inlet temperature °C 25 25 25 25
ON stage I l/min 2,4 3,0 3,5 4,1
ON stage II l/min 3,9 4,9 5,6 6,3
Pressure drop at flow rate MPa 0,09 0,11 0,13 0,15
Flow rate for pressure drop l/min 3,9 4,5 5,6 6,3
Flow rate limit at l/min 4,7 5,9 7,0 7,8
DHW delivery l/min 7,0 9,4 11,1 12,5
Δϑ at DHW delivery K 26 26 26 26
Rated capacity l 0,4 0,4 0,4 0,4
Dimensions
Height mm 485 485 485 485
Width mm 226 226 226 226
Depth mm 93 93 93 93
Weights
Weight kg 3,6 3,6 3,6 3,6
Guarantee
The guarantee conditions of our German companies do not
apply to appliances acquired outside of Germany. In countries
where our subsidiaries sell our products a guarantee can only
be issued by those subsidiaries. Such guarantee is only grant
-
ed if the subsidiary has issued its own terms of guarantee. No
other guarantee will be granted.
We shall not provide any guarantee for appliances acquired in
countries where we have no subsidiary to sell our products.
This will not aect warranties issued by any importers.
Environment and recycling
We would ask you to help protect the environment.
After use,
dispose of the various materials in accordance with national
regulations.
WARRANTY
ENVIRONMENT AND RECYCLING