Operating Instructions and Installation Instructions
26
Installation - for contractors
15.3 DHW output
The DHW output is subject to the mains voltage, the ap-
pliance's connected load and the cold water inlet temper-
ature. The rated voltage and rated output can be found on
the type plate (see chapter "Troubleshooting").
Rated voltage Cold water inlet temperature
400 V
13.5 5.8 6.9 8.4 10.7
18.0 7.8 9.2 11.2 14.3
21.0 9.1 10.7 13.0 16.7
24.0 10.4 12.2 14.9 19.0
Rated voltage Cold water inlet temperature
400 V
13.5 4.3 4.8 5.5 6.4
18.0 5.7 6.4 7.3 8.6
21.0 6.7 7.5 8.6 10.0
24.0 7.6 8.6 9.8 11.4
15.4
Specic electrical resistance and specic electrical con-
ductivity (see chapter "Data table").
-
Re-
sist-
ance
ρ ≥
Conductivity
σ ≤
Re-
sist-
ance
ρ ≥
Conductivity
σ ≤
Re-
sist-
ance
ρ ≥
Conductivity
σ ≤
Ωcm mS/m μS/cm Ωcm mS/m μS/cm Ωcm mS/m μS/cm
900 111 1111 800 125 1250 735 136 1361
15.5
Mono lever mixer tap, approx. MPa 0.04 - 0.08
Thermostatic valve, approx. MPa 0.03 - 0.05
Hand shower, approx. MPa 0.03 - 0.15
When calculating the size of the pipework, a pressure
drop for the appliance of 0.1 MPa is recommended.
15.6
In the event of faults, loads up to a maximum of 95 °C
at a pressure of 1.2 MPa can temporarily occur in the
installation.
15.7
The product data complies with EU regulations relating to
the Directive on the ecological design of energy related
products (ErP).
DDLT PinControl 13 DDLT PinControl 18 DDLT PinControl 21 DDLT PinControl 24
222384 222385 222386 222387
Manufacturer AEG Haustechnik AEG Haustechnik AEG Haustechnik AEG Haustechnik
Load profile XS S S S
Energy efficiency class A A A A
Annual power consumption kWh 469 483 483 483
Energy conversion efficiency % 39 38 38 38
Default temperature setting °C - - - -
Sound power level dB(A) 15 15 15 15
Special information on measuring efficiency None None None None