Manual

2
1
2.
Pull the rear end of the shelf sup-
port away from the side wall and re-
move it.
Installing the shelf supports
Install the shelf supports in the opposite
sequence.
Valid with telescopic runners:
The retaining pins on the tele-
scopic shelf runners must point
to the front!
10.3 Oven door and glass panels
A
A
CAUTION!
Be careful when you remove the
door from the appliance. The
door is heavy!
Put the oven door with the outer
side down on a soft and level sur-
face to prevent scratches.
Removing the oven door
1.
Open the oven door as far as it
goes.
2.
Fully press the clamping levers (A)
on the two door hinges.
45°
3.
Close the oven door until it is at an
angle of approximately 45°.
4.
Hold the door with one hand on
each side and pull it away from the
appliance at an upwards angle.
5.
Now you can remove the inner glass
panels and clean them.
To install the door do the above
steps in the opposite sequence.
The oven door has 2, 3 or 4 pan-
els of glass (depends on the
model).
CAUTION!
Rough handling of the glass, es-
pecially around the edges of the
front panel, can cause the glass
to break.
24
www.aeg.com