User Manual

ManualsBrandsAEG ManualsKitchenDE4003000M

Problem Possible cause Solution

The oven does not heat

The automatic cut-out is

switched on

Refer to "Automatic cut-

out"

The oven does not heat

The fuse is released Make sure, if the fuse is

the cause for the mal-

function. If the fuse re-

leases again and again,

refer to an authorized

electrician

The oven lamp does not

operate

The oven lamp is defec-

tive

Replace the oven lamp

The display shows an er-

ror code that is not in

this list

There is an electronic

fault

• Switch off the appli-

ance with the house

fuse or the safety

switch in the fuse box

and switch it on again

• If the display shows

the error code again,

refer to the Customer

Care Department

If you cannot find a solution to the prob-

lem yourself, contact your dealer or the

service centre.

The necessary data for the service centre

is on the rating plate. The rating plate is

on the front frame of the appliance cavi-

ty.

We recommend that you write the data here:

Model (MOD.) .........................................

Product number (PNC) .........................................

Serial number (S.N.) .........................................

12. INSTALLATION

WARNING!

Refer to the Safety chapters.

The built-in unit must meet the

stability requirements of DIN

68930.