Operating instructions

Protect PV.600/800 OD Series - Operating Instructions
8000041160 BAL Page 7 of 100
1.5 Complaints
Complaints must be submitted within eight days of receiving the
goods, along with the delivery note.
Any claims submitted after this point cannot be considered.
In the case of any faults on or claims relating to the system, please
notify AEG PS immediately, stating the following equipment de-
tails:
Type designation
•
Serial number •
Reason for claim •
Period of use •
Ambient conditions •
Operating mode •
1.6 Modification Service
AEG Power Solutions GmbH reserves the right to make modifica-
tions with regard to content and technical data in these operating
instructions.
All modifications and additions relevant to the equipment, particu-
larly in the case of technical data and instructions for use and
maintenance, will be issued as a change notification or as a new
revision.
The change notifications and additions received from AEG PS
should immediately replace/be inserted in the available operating
instructions to keep them up to date.
1.7 Handling
These instructions must be read and understood before beginning
any work.
They contain important notes relating to the equipment that must
be observed during installation, commissioning and maintenance.
This manual is structured so that all work can be performed by ap-
propriately trained, skilled personnel.
If danger to personnel and equipment cannot be ruled out in the
case of certain work, these activities are highlighted accordingly by
safety instructions ( Chapter 2) and warning signs.
1.8 Where to Keep the Operating Instructions
The operating instructions are to be kept in the document com-
partment of the equipment. They must always be stored together
with the equipment and must always be available to the skilled
personnel.
Should the equipment change hands, include these instructions
when handing it over to the new owner.