Operating instructions

Protect PV.600/800 OD Series - Operating Instructions
Page 76 of 100 8000041160 BAL
9 Operation
DANGER
Contact with voltage
Risk to life due to electric shock.
 Disconnect the equipment safely.
 Move the victim away from live parts using dry insulating
material.
 Get medical help and inform the control room.
DANGER
Auxiliary voltage despite emergency shutdown
Risk to life due to electric shock.
 Disconnect the equipment safely.
i
Keep the equipment clean to minimise leakage currents.
CAUTION
Failure of remote signalling.
Malfunctions during operation.
 Disconnect the equipment safely.
The equipment works in individual operation.
9.1 Local Control System
In the "Operating display" and "Inverter" menus of the display and
operating unit, you can switch the inverter on and off using the
general keys. The keyboard symbols in the menu indicate the con-
trol function which is currently available. If a switch-off procedure
has been initiated, it must be confirmed by means of a security
prompt in order to avoid inadvertent switching off. The general
control system of the inverter can be blocked and protected with a
password.
If a unit fault occurs, the cause of the fault is displayed in the "In-
verter" menu ( Chapter 5.7.3 - Table of Faults). After the fault
has been eliminated, the fault message must be confirmed with
"Acknowledge fault".
The acoustic signal generator is acknowledged via the
"Acknowledge acoustic signal generator" key on the operating dis-
play. The acoustic signal generator can be blocked at a general
level in the event of faults.