Operating instructions

Protect PV.600/800 OD Series - Operating Instructions
8000041160 BAL Page 79 of 100
The LCD background illumination is switched off if no operations
are being carried out and the equipment is not in a faulty status. In
the event of a fault message, the background illumination remains
switched on until the fault is acknowledged.
If the inverter is in the "Night" status, only "Sleep mode" is dis-
played. The background illumination is also displayed.
The DOU can be activated by pressing any key.
The operating display consists of 3 areas.
1 2 3 4 5
Figure 29 - Operating display - Left, current operating status
1 DC from PV cells, sufficient
2 Very good sunlight
3 Total energy currently fed in
4 Inverter in operation
(symbol flashes if there is a fault)
5 Mains supply
("Operation" status)
1 2 3 4 5 6 7 5 8 9
Figure 30 - Operating display - Left, possible operating statuses
1 DC from PV cells, lower
2 Good sunlight
3 Inverter out of operation
("Waiting"/"Waiting for
feed conditions" status)
4 No mains supply
5 DC from PV cells, too low
6 Low sunlight
7 Inverter out of operation
("Waiting"/"Waiting for
feed conditions" status)
8 No sunlight
9 Inverter out of operation
("Night"/"Off" status)
1 2 3
Figure 31 - Operating display - Middle, infeed values
1 Current power
2 Current daily data (standard)
3 Date/month/year/time period