Operating instructions
Table Of Contents
- OPERATING INSTRUCTIONS
- Table of Contents
- 1 General Information
- 2 Safety
- 3 Scope of Delivery
- 4 Equipment Specifications
- 5 Functional Description
- 6 Storage and Transport
- 7 Installation
- 8 Commissioning
- 9 Operation
- 10 Maintenance
- 11 Decommissioning and Dismantling
- List of Tables
- List of Figures
Protect PV.600/800 OD Series - Operating Instructions
8000041160 BAL Page 85 of 100
CAUTION
Insufficient ventilation of equipment
Equipment may overheat.
Keep ventilation openings clear.
Ensure the equipment is sufficiently ventilated.
WARNING
Heat generation in resistors
Risk of burning.
Do not touch hot components.
WARNING
Hinge side of the door when closing
Fingers or hands may be crushed.
Do not hold the hinge side of the door.
Take care while closing the cabinet door.
WARNING
Entry of water into electrical equipment
Risk to life due to electric shock.
Do not use water to clean the cabinets.
Do not place any vessels containing fluids (beverage cups,
for example) on electrical equipment.
5 safety rules
1. Disconnect safely.
2. Secure the equipment against being switched back on.
3. Verify that all poles are de-energised.
4. Earth the equipment, close the earthing switch and short-
circuit the equipment.
5. Provide protection in the form of covers or barriers
for any neighbouring live parts.
i
A safe disconnection certificate or a release certificate accord-
ing to DIN VDE 0105-100 (EN 50110) must be presented prior
to all maintenance and repair work.