Operating instructions

Protect PV.500/630-MH - Operating Instructions
8000043212 BAL Page 17 of 45
U
nscrew and remove the screws that are already there, position
the assembly brackets so that they are flush and screw them in
place using the relevant tightening torque.
Figure 11 - Hole for heavy-duty dowel
Drill the holes for the heavy-duty dowels in the completed
foundation.
The distance between the holes and the edge is specified by the
manufacturer of the heavy-duty dowels. For the M16 anchor bolts
supplied, it must be at least 80 mm to prevent cracks in the
concrete.
Fasten the assembly brackets to the relevant tightening torque
using the anchor bolts and spacers supplied.