Operating instructions

Protect PV.500/630-MH - Operating Instructions
Page 30 of 45 8000043212 BAL
10.2.5 Care
10.2.5.1 Lubrication
Carry out the following care measures for the station:
• Lubricate hinges, rods and guide rails after cleaning.
• After cleaning rubber door seals, rub lightly with a rubber care
product such as deer tallow.
• Clean weather protection grid seals and rub with a rubber care
product. When dismantling the weather protection grid, carry
out care measures for the entire seal.
10.2.5.2 Replacing Filter Mats (PV.xxx)
1 2
Figure 17 - Filter mat PV-xxx
1 Filter mat 2 Protective grid
In accordance with DIN EN 779, CTM 60 air filter mats must be
replaced annually.
1. Unscrew the protective grid.
2. Remove the old filter mat and screw in the new one.
3. Screw the protective grid back on.