Operating instructions

Protect PV.500/630-MH - Operating Instructions
8000043212 BAL Page 31 of 45
10.2.5.3 Replacing Filter Mats (MH)
1 2 3 3 4
Figure 18 - Filter mat in MH station
1 Filter mat insert
2 Filter mat
3 Screw fastening M5 x 12
Clean and replace air filter mats according to the pollution degree;
however, this must be done at least one a year in accordance with
DIN EN 779.
1. Unscrew the filter mat insert from the inside.
2. Remove the old filter mat and screw in the new one.
3. Screw the filter mat insert back on.
10.2.5.4 Replacing Door Seals
1 2 3 2 4
Figure 19 - Door in MH station
1 Lock side
2 Sealing profile 1
3 Sealing profile 2
4 Hinge side
1. Remove the old sealing profile. Clean the area and insert the
new profile. Starting with profile 2 at the top of the hinge side
, attach the seal up to the edge of the lock side .
2. Profile 1 is attached underneath these markings.