Operating instructions

Protect PV.500/630-MH - Operating Instructions
Page 36 of 45 8000043212 BAL
10.3.2.2 Exchanging the LVMD Service Flap Opener
1 2 3 4
Figure 23 - LVMD opener
1 Opening lever
2 Screw connection
3 LVMD service flap
4 Release mechanism
The LVMD service flap opening lever reduces the frame width by
about 42 mm. For this reason, the lever should be dismantled as a
precaution when replacing the PV.xxx. To do this, the two
M5 x 20 countersunk screws and the lever must be removed.
Installation is the same procedure in reverse.
10.3.2.3 Exchanging the Waste Air Duct
1 2 3 2 3 4 5
4 2 6
Figure 24 - Air outlet conduit PV.5x0/6x0
1 Detailed view of connection
from rear
2 Screw connection M5 x 12
3 Screw connection M16 x 40
4 Air baffle
5 Fans M2 and M3
6 INV control cabinet
The Protect PV.8x0 is equipped with an additional fan M4 on the
top of the cabinet DC/AC. The fan cover of the PV.8x0 is been
corresponding longer and enclosed this fan.