Operating Instructions and Installation Instructions

OPERATING INSTRUCTIONS
Using the product
26
6.2.5 Setting the day and time
The day and time are set to be able to use the 3 preset
programmes, and this can be done by holding down
the mode key.
The day flashes the day to be set (1 = Monday). To edit
it, push the “+” or “-“ keys.
Push the mode key to confirm the day set and move
on to setting the time.
The display flashes the hour to be set. To edit it, push
the “+” or “-“ keys.
Push the mode key to confirm the hour set and move
on to setting the minutes.
The display flashes the minutes to be set. To edit it,
push the “+” or “-“ keys.
Push the mode key to confirm the minutes set and
conclude the setting operation.
The system will go back to the operating mode acti-
vated when setting was started.
If you try to activate a preset programme without ha-
ving saved the date and time, this setting procedure
will be activated automatically.
6.2.6 Customizing P1 Program
Program P1 may be modified to suit the users needs. Modification of P1 gives the user the opportunity to set the wished ambient tem-
perature, choosing among Comfort, ECO o Frost Free, for every hour of the day and for the whole week.
Please refer to paragraph 6.2.4 in order to set different levels of temperature to each working Mode.
Each displayed hour of the day, shows the temperature level of P1 Program currently set. In case of first use of the radiator, the set P1
Program profile is the one indicated in Paragraph 6.2.3.1.
In order to display or modify P1 Program, please proceed as follows:
Press “M” to select P1 Program. In case Time has not been set previously (brand-new
product, or lack of power connection longer than 30
min.) the time regulation procedure will be activated
automatically (refer to paragraph 6.2.5).
To display P1 Program hold button “-“ for 3 seconds.
The first day to see/modify is now displayed (1=
Monday).