EN USER MANUAL DE BENUTZERHANDBUCH FR MANUEL D’INSTRUCTIONS
Hob²Hood It is an advanced automatic function which connects the hob to a special hood. Both the hob and the hood have an infra — red signal communicator. Speed of the fan is defined automatically on basis of mode setting and temperature of the hottest cookware on the hob. You can also operate the fan from the hob manually. When you operate the appliance with the function: • Protect the hood panel from direct sunlight. • Do not spot halogen light on the hood panel. • Do not cover the hob panel (eg.
Receiver activation Model of the hood X86464MV01 X09481BV-X X86464BV01 EFV90673OK EFV90673OW EFF90670OY $ % & ' ( ) * + $ % & ' ( ) * + Button G Function Led If pressed and held for 5 seconds with the hood and lightturned off and no alarm, do: Enables the Remote control. 2 Flashes Led buttom C + B Disables the Remote control.
Abzugshauben mit Hob²Hood Funktion Dabei handelt es sich um eine innovative Automatikfunktion, die die Verbindung des Kochfelds mit einer Spezial-Abzugshaube ermöglicht. Kochfeld und Haube funktionieren mit einem Infrarot-Sender. Die Lüftergeschwindigkeit wird je nach Einstellung und Temperatur des Kochgeschirrs auf dem Kochfeld automatisch reguliert. Der Lüfter kann auch über das Kochfeld von Hand bedient werden. Bei den meisten Abzugshauben ist die Fernbedienung von Haus aus deaktiviert.
Aktivierung des empfängers Modell der Abzugshaube X86464MV01 X09481BV-X X86464BV01 EFV90673OK EFV90673OW EFF90670OY $ % & ' ( ) * + $ % & ' ( ) * + Taste G Funktion Led Mit 5 Sekunden langem Drücken bei ausgeschalteter Abzugshaube und Beleuchtung und ohne Alarm, wird: Die Fernbedienung aktiviert. 2 mal Blinken LED Taste C + B. Die Fernbedienung deaktiviert. 1 mal Blinken LED Taste C + B.
Hotte Hob²Hood Il s’agit d’une fonction automatique avancée qui raccorde la plaque de cuisson à une hotte spéciale. Un dispositif de communication à signal infrarouge est installé sur la plaque et sur la hotte. La vitesse de ventilation est automatiquement définie en fonction des paramétrages et la température de la casserole la plus chaude sur la plaque de cuisson. Le ventilateur peut également être utilisé en mode manuel à partir de la plaque de cuisson.
Activation du récepteur Modèle de hotte X86464MV01 X09481BV-X X86464BV01 EFV90673OK EFV90673OW EFF90670OY $ % & ' ( ) * + $ % & ' ( ) * + Bouton Fonction G Led Si appuyé pendant 5 secondes tandis que la hotte et le voyant sont éteints et en l’absence d’alarme: - active la télécommande; La LED C + B clignote 2 fois. - désactive la télécommande. La LED C + B clignote 1 fois.
991.0370.