Operation Manual

65
Troubleshooting
Before sending the machine to the Customer Services, use the following table to check whether you can rectify
the fault yourself.
Fault Possible cause Solution
The power supply
light does not light
No power supply
WARNING:
Before searching for the fault, please turn the device
off.
 During battery operation:
check whether the battery has clicked into place.
 During mains adapter operation:
Put the mains plug in correctly, if necessary, check
the socket is working with another appliance.
no power supply/ mains switch
switched off
Switch the player on by the mains switch (Fig. 1/1).
No image displayed
on screen
During operation with a
television set:
Video cable not correctly
connected
WARNING:
Before searching for the fault, please turn the device
off.
Check the correct fi t of the Video cable ➯ Page 50,
„Connection to Other Equipment“. Make sure that the
jacks are tightly in the sockets.
TFT screen is switched off Press the TFT ON/OFF (Fig. 2/1) button on the remote
control.
no DVD/CD inserted Insert a CD/DVD.
DVD/CD not compatible Use only compatible media (see ➯ Page 40, „Technical
data“).
DVD/CD incorrectly placed in
CD/DVD-tray
Turn the CD/DVD around.
CD/DVD is dirty Clean the CD/DVD around ➯ Page 52, „Handling
CD/DVD“.
CD/DVD is damaged Use a different CD/DVD.
Incorrect settings Check the settings of your DVD-Player.
The child protection system is
activated
Deactivate the child protection ➯ Page 62, „Child
protection“.
No response when
pressing button
Power supply problem or
static charging of appliance
Switch off the main switch and pull out the mains plug.
Insert the mains plug into the socket and switch the
player on again.
Troubleshooting
05-DVD 4516 AEG - GB Neu 65 03.05.2006, 9:37:39 Uhr