Operation Manual

GB-29
11. Technical specifications
Signal system PAL/AUTO/NTSC
Frequency Response 20HZ-20KHZ ( at 1KHz 0 dB)
Signal-to–Noisy
Ratio(Audio)
≥90 dB ( at 1KHz 0 dB)
Audio Distortion + Noise ≤-60dB ( at 1KHz0dB)
Audio Output (Analog
audio)
2.0
+0
-1..0
Vrms
Video Output Composite: 1.0±0.2Vp-p
Load impedance: 75Ω, imbalance, negative polarity
Max Resolution 720P/1080i
Power Supply ~220-230V 50Hz
Dimensions 430(mm) X 260(mm) X38(mm)
Supported Disc DVD/SVCD/VCD/CD/MP3/Kodak Picture/Photo CD
Accessories
RCA Audio/Video cables (composite video and L-R audio)
Remote Control unit
User Manual
REFERENCE:
To protect your DVD player, the interval between two consecutive Power button operations
must be above 30 seconds.
No using for a period of time, please pull out the plug from the electronic outlet.
The player should be operated only on condition that the type of power supply corresponds
to the marking label. Otherwise, it doesn’t work or even be damaged.
The player may not be compatible with some encrypted discs.
If the player stops playback by accident, please power it on again.
Appearance and function is subject to change without notice.
This device has been tested according to all relevant current CE guidelines, such as
electromagnetic compatibility and low voltage directives, and has been constructed in
accordance with the latest safety regulations.
Subject to technical changes without prior notice!