Operation Manual

54
Themen
Overview of the main menu
General setup settings
Slide control
In many menus you will fi nd slide controls to adjust e.g. the volume or the
brightness of the screen. The slide control is used as follows:
1. Select with the ENTER button.
2. Move the control with the Cursor Buttons (
 /  ).
3. Confi rm the entry with the ENTER button.
 General Setup (1)
 Audio Setup Page (2)
 Video Setup Page (3)
 Preference Page (4)
 Password Setup Page (5)
 Exit Setup (6)
 NOTE:
Some of the menu settings are only available in stop mode (depending on
the DVD).
TV Display
Here you can adapt the output of the DVD-Player to the TV-aspect.
Concerning the background: If you do not have a wide screen TV the TV-
aspect will be 4:3. However, most feature fi lms have an aspect of 16:9, the
image is therefore too wide for the TV-screen.
Here you can specify how the replay of the fi lm is to be adapted to the
playback device:
 4:3 Panscan: You will only see the middle section of the fi lm. The borders
will be cut off.
 4:3 Letterbox: You will see the complete width of the fi lm. The fi lm is thus
reduced in size, whereby black bars appear below and above the fi lm
 16:9: Select this option if you use a wide screen TV for replay. Please note
that fi lms, that have been recorded with TV-aspect 4:3 can still be replayed
using aspect 4:3. This means, that replaying this fi lm will not require the
complete wide screen area of the television.
 Wide Squeeze: Select this option if you use a wide screen TV for replay.
This setting is used to adapt fi lms in 4:3 format to the aspect ratio of the
widescreen television set.
 NOTE:
The setting „4:3 Panscan“ is not supported by all DVDs.
Changing the default settings
05-DVD 4524 AEG - GB 54 22.01.2007, 14:09:00 Uhr