Operation Manual

English

Connecting the Video cable

Fig. 2/13

Fig. 2/11

Fig. 2/14

Fig. 2/15

The video cable transmits the video data from your DVD-Player to the TV

or the Video-Projector.

There are four di erent ways of connecting the DVD-Player with your TV/

Video-Projector. Select one of these possibilities to suit your replay unit.

 NOTE:

If you do not use a SCART connection it is necessary to make an

additional audio connection for the transmission of the audio data

(i.e. the sound).

SCART

SCART is used to transmit both Video and Audio data.

1. Plug the SCART jack  rmly into the socket on the back of the player.

2. Plug the SCART jack into the corresponding socket on your playback

device.

Component Video

Connection using a Component Video cable ensures a very high replay

quality.

Component Video transmits only Video signals.

1. Plug each of the three jacks into the corresponding sockets on the

DVD-Player.

2. Plug the jacks into the corresponding socket on your playback device.

In the "Video" menu select the "Component" submenu. Here you can

change the settings „CVBS“, „YUV“ and „RGB“ on the playback device

that you have connected. Please see the operating instructions of the

connected device for the correct setting.

S-Video

Connection using a S-Video cable ensures a very high replay quality.

Component Video transmits only Video signals.

1. Plug the S-Video jack into the socket on the back of the player.

2. Plug the S-Video jack into the corresponding socket on your playback

device.

Composite-Video

Composite-Video is used to transmit both Video data.

1. Plug the Composite-Video jack into the socket on the back of the

player.

2. Plug the Composite-Video jack into the corresponding socket on your

playback device.

05-DVD 4530_GB.indd 4005-DVD 4530_GB.indd 40 19.02.2008 16:06:10 Uhr19.02.2008 16:06:10 Uhr