Operation Manual

English
44
Fig. 2/14
Inputs on the Front
Fig. 1/9
Fig. 1/10
Switching on the player
Fig. 1/1
Optical
Connect an optical cable for transmitting the digital audio signal with
your playback device or ampli er.
1. Insert the optical plug into the socket on the rear of the device.
2. Insert the optical plug into the corresponding socket of your playback
device or ampli er.
USB Input (on the Front)
Connect your output device to the socket on the front of the DVD player.
Use a corresponding USB adapter cable if necessary.
Memory Card Slot (on the Front)
Insert an SD/MMC or MS memory card into the card slot on the front of
the device.
Turn on the main switch of the DVD player by pressing the "POWER"
on/o switch on the front of the machine.
About the DVD-Player
With this DVD-Player you can play a vast variety of DVD-formats
➯ Page 36, „Technical data“.
However, you must be aware that in many cases DVDs are encrypted with
a so-called “Regional Code”. This speci es for which region in the world
the DVD is intended. As an example, the DVDs marked with regional code
“1” are intended for the USA and Canada. DVDs with regional code “2” are
for use in Europe.
05-DVD 4531 USB-CR_GB.indd 4405-DVD 4531 USB-CR_GB.indd 44 21.02.2008 9:22:24 Uhr21.02.2008 9:22:24 Uhr