Operation Manual

English
52
Overview of the main menu
General setup settings
Slide control
In some menus you will  nd slide controls with which you can adjust the
volume or picture brightness, for example. The slide control is used as
follows:
1. Select with the ENTER button.
2. Move the control with the Cursor Buttons (/).
3. Con rm the entry with the ENTER button.
 GENERAL = General Setup
 AUDIO = Audio Setup Page
 DOLBY = Dolby settings
 VIDEO = Video Setup Page
 PREFEREN = Preference Page
 NOTE:
Some of the menu settings are only available in stop mode (depen-
ding on the DVD).
TV Display
Here you can adapt the output of the DVD-Player to the TV-aspect.
Concerning the background: If you do not have a wide screen TV the
TV-aspect will be 4:3. However, most feature  lms have an aspect of 16:9,
the image is therefore too wide for the TV-screen.
Here you can specify how the replay of the  lm is to be adapted to the
playback device:
 Normal/PS: You will only see the middle section of the  lm. The
borders will be cut o .
 Normal/LB: You will see the complete width of the  lm. The  lm is
thus reduced in size, whereby black bars appear below and above the
 lm
 Wide: Select this option if you use a wide screen TV for replay. Please
note that  lms, that have been recorded with TV-aspect 4:3 can still
be replayed using aspect 4:3. This means, that replaying this  lm will
not require the complete wide screen area of the television.
 NOTE:
The setting „Normal/PS“ is not supported by all DVDs.
Angle Mark (Camera Angle)
If the DVD contains sequences recorded from di erent camera angles you
can use the ANGLE button (Fig. 3/23) to select the various camera angles.
This function is only available if the DVD contains scenes with various
camera angles.
Before you can use this function it has to be activated.
 On: The angle symbol is shown on the screen.
 O : No angle symbol is shown on the screen.
05-DVD 4531 USB-CR_GB.indd 5205-DVD 4531 USB-CR_GB.indd 52 21.02.2008 9:22:28 Uhr21.02.2008 9:22:28 Uhr