Operation Manual

ManualsBrandsAEG ManualsDVD PlayerDVD 4535

English

Creating a playlist (DVD/CD)

Fig. CD

Fig. DVD

Deleting a playlist (DVD/CD)

Using CD/DVD

Using a memory card

It is possible that you may not wish to play the titles in the same order

that they are to be found on the DVD. The function „Create Playlist“ you

can create your own playing order.

To do this, proceed as follows:

1. Press the PROG button (Fig. 3/33). A table is displayed. Here you can

enter the desired order of tracks (in the case of CDs/MP3 CDs) or

chapters/titles (in the case of DVDs).

 NOTE:

However, your playlist will be lost when switching o the DVD-

Players or when inserting a new DVD.

2. Use the Cursor Buttons (Fig. 3/30) to navigate in the table.

3. Enter the desired title and chapter at the relevant position in the

table. Use the Numerical Buttons (Fig. 3/2) for this purpose.

4. Use the Cursor Buttons (Fig. 3/30) to select the command “PLAY” at

the bottom of the screen to save the input.

5. Press the ENTER button (Fig. 3/7) on the remote control to conrm

this command.

1. Press the PROG button. You will now see a table.

2. Use the Cursor Buttons (Fig. 3/30) to manoeuvre to the command

“CLEAR” at the bottom of the table.

3. Press the ENTER button (Fig. 3/7) on the remote control to conrm

this command.

4. Press the PROG button to terminate this procedure.

Working in le mode

As well as being able to play back „normal“ lms or music from CDs/

DVDs, this DVD player is also able to play back video or audio les from

CDs or DVDs which are stored in the le system. Such media are fre-

quently available if you create CDs of digital photographs or MP3 music

on your computer.

1. Place the CD or DVD on the tray ➯ Page 47, „Loading a CD/DVD“.

2. Select the desired le(s) and start the replay ➯ Page 52, „Selecting

le/directory and starting replay“.

The following memory cards can be used:

 SD-Card

 Multi Media Card

 Memory-Stick

1. Insert the memory card into the card reader (Fig. 1/8).

2. Press the USB button (Fig. 3/9) on the remote control in order to

turn the DVD player to the le mode.

05-DVD 4535 N AEG_GB.indd 51 17.07.2009 12:59:30 Uhr

. Use the Cursor Buttons (Fig. 3/ 0) to select the „CARD“ mode. Con-

 rm with the ENTER (Fig. 3/

button.