Operation Manual
![](/manual/aeg/dvd-4535/operation-manual-german-english/images/img-52.png)
English
52
Using a USB medium
Selecting le/directory
and starting replay
. Select the desired le(s) und start playback ➯ Page 52, „Selecting
le/directory and starting playback“.
. If you would like to change back to DVD mode, press the USB button
(Fig. 3/9) again.
By means of the USB connection you can connect numerous devices
to the DVD Player.
This device has been developed in accordance with the latest technical
developments in the USB eld. Unfortunately the large number of dif-
ferent types of USB storage media on oer today makes it impossible to
guarantee full compatibility with all USB storage media. For this reason
there may be problems in rare cases with playing back from USB storage
media. This is not a malfunction of the device.
1. Insert a USB storage medium directly into the corresponding con-
nection of the DVD player (Fig. 1/10).
2. Press the USB button (Fig. 3/9) on the remote control in order to
turn the DVD player to the le mode.
NOTE:
In order to nd out which les can be played back the DVD player
now reads the contents of the storage medium. In the case of large
storage media this procedure may take a long time.
.
Select the desired le(s) und start playback ➯ Page 52, „Selecting
le/directory and starting playback“.
Media may contain a large number of data/les. You must therefore rst
determine the data to be played.
1. If this has not yet taken place: Insert the CD or DVD in the drive. The
le selection dialogue appears. This dialogue is structured as follows:
Directory overview (1)
File overview (2)
Currently selected directory and probably the selected le (3):
The directory name appears in square brackets.
Example: „[Directory1]Filename2.jpg“.
Button „Selection Audio Files“ (4): Music les are displayed.
05-DVD 4535 N AEG_GB.indd 52 17.07.2009 12:59:30 Uhr
NOTE:
In order to nd out which les can be played back the DVD
player now reads the contents of the storage medium. In the
case of large storage media this procedure may take a long
time.
Use the Cursor Buttons (Fig. 3/ 0) to select
„DISC“ mode. Conrm with the ENTER (Fig. 3/
button.
the 3
7)
4
5
. Use the Cursor Buttons (Fig. 3/ 0) to select „USB“ mode. Con rm
with the ENTER (Fig. 3/ button.
3
4
. If you would like to change back to DVD mode, press the USB button
(Fig. 3/9) again.
Use the Cursor Buttons (Fig. 3/ 0) to select
„DISC“ mode. Conrm with the ENTER (Fig. 3/
button.
the 3
7)
5
3
7)