Operation Manual

English
42
Using fast forward or reverse
Enlarging a screen section
Changing the viewing angle
Adjusting the volume
Creating a playlist (DVD)
The DVD-Player has a fast forward and a fast reverse feature.
1. Press the  F.FWD (Fig. 3/18) or  F.RWD button (Fig. 3/19) to start
fast forward or fast reverse. The current replay direction and the
speed, e.g. „ x2“ is now displayed on screen.
2. Press the  or  button several times in order to change the speed.
The speed can be accelerated by factor 2, 4, 8 or 16.
3. Press the „PLAY“ button (Fig. 3/15) to restart the “normal” replay
when the desired section is reached.
You can change the screen section when viewing DVDs, VCDs or images.
Press the ZOOM button (Fig. 3/6) to change the screen section. Press the
button several times to select the suitable zoom factor or to return to the
original zoom factor.
 NOTE:
With the cursor buttons (Fig. 3/25) you can move through the zoomed
image.
Some DVDs oer the possibility to select the viewing angle.
Press the ANGLE button (Fig. 3/28) to change the viewing angle.
 NOTE:
If changing the Viewing Angle is not possible, the message „Not allowed
at the moment“ will be displayed.
Repeat pressing the the button to choose a dierent viewing angle, or
to return to the original viewing angle.
Press the VOLUME + button (Fig. 3/10) to increase the volume.
Press the VOLUME - button (Fig. 3/11) to reduce the volume.
 NOTE:
Please remember, that this will only change the output volume of the
DVD-Player. In order to adjust the volume to your requirements you
may also have to change the volume of the playback device.
It is possible that you may not wish to play the titles in the same order
that they are to be found on the DVD. The function „Create Playlist“ you
can create your own playing order.
To do this, proceed as follows:
1. Press the PROG button (Fig. 3/1). A table is displayed. Here you can
enter the desired order of the chapters/titles.
 NOTE:
However, your playlist will be lost when switching o the DVD-
Players or when inserting a new DVD.
2. Use the Cursor Buttons (Fig. 3/25) to navigate in the table.
3. Enter the desired title and chapter at the relevant position in the
table. Use the Numerical Buttons (Fig. 3/32) for this purpose.
4. Store your entry by selecting the „ Play“ command with the Cursor
Buttons (Fig. 3/25) at the edge of the table.
05-DVD 4542_AEG_GB.indd 42 14.10.2009 15:09:50 Uhr