Operation Manual

English
46
Ripping (CD-MP3 Conversion)
Scrolling
 Manual: Press the „I PREV“ (Fig. 3/21) or „I NEXT“ button (Fig.
3/20) on the remote control to scroll forward or back.
 Interrupt scrolling: Press the PLAY/PAUSE button (Fig. 3/15) in order
to interrupt the automatic picture change. Press the PLAY/PAUSE
button again in order to resume picture playback.
Rotating a photo
You can use the Cursor buttons to rotate a photo during replay:
 Rotate for 180°: Cursor Button „“, „“
 Rotate clockwise for 90°: Cursor Button „“
 Rotate counter-clockwise for 90°: Cursor Button „“
If an audio CD is inserted you can activate the ripping function. This
function allows you to convert the data on the audio CD in real time to
the MP3 format and then store them on a connected MP3 player.
1. Use the cursor buttons (Fig. 3/25) to select the „Ripping“ eld and
conrm with the ENTER key (Fig. 3/14).
2. In order to select the target memory (USB) use of the cursor buttons
to select the „Destination“ eld and conrm with the ENTER key.
The selection window opens. Make your selection with the cursor
buttons and ENTER.
3. Now select the tracks to be converted in the left-hand column with
the cursor buttons and the ENTER key.
 NOTE:
 Ifyouwouldliketoconvertallthetracks,selecttheeld„Select
All“.
 Foreachconversionthedevicecreatesanewfolder.
 Therespectivestoragedestinationcanonlybeselectedifan
appropriate medium has been inserted.
4. By repeatedly pressing the ENTER key (Fig. 3/14) you can choose
between the storage qualities „Low“, „Medium“, „High“ and „Best“ in
the „Rip Quality“ line.
 NOTE:
 Thememorycapacityisshowninthelowerright-handcolumn.
Please ensure that the memory capacity (size of selected) does
not exceed the available memory capacity (available space).
 Thebitratesofthesettingsareasfollows:Low=128kBit/s,
Medium = 160 kBit/s, High = 192 kBit/s, Best = 320 kBit/s
5. Now use the „“ cursor button to select the „Ripping Start“ eld
below the „Rip Quality“ eld and press the ENTER key (Fig. 3/14).
6. The conversion begins. Progress is shown on the screen.
 NOTES:
 Youcanstoptheconversionprocessbypressing„Cancel“.Pressthe
ENTER key to do so. In the conrmation prompt select the „Yes“
eld and conrm with the ENTER key. The tracks already converted
are nevertheless stored.
 Interruptedtracksandthosealreadypresentcanonlybedeleted
on the PC.
05-DVD 4542_AEG_GB.indd 46 14.10.2009 15:09:50 Uhr






