Instruction manual

English
42
Stopping repeat
Selecting a section
to be repeated
Using the DVD-menu
Using fast forward or reverse
Enlarging a screen section
Changing the viewing angle
Press the REPEAT button (Fig. 3/28) repeatedly until the words “Repeat
O“ appear.
You can dene a freely selected section to be automatically repeated.
To do this, proceed as follows:
1. Mark the beginning of the section to be repeated. During repetition
press the button A-B (Fig. 3/7) on the remote control once. The
message “Rep A-“ appears on the screen.
2.
Mark the end of the section to be repeated by pressing the A-B-
button on the remote control once again. The message “Rep A-B“
appears on the screen. The previously marked section is now repeated.
Press the A-B-button again to stop the repetition.
 NOTE:
On CDs/MP3 CDs the section to be repeated must be within a track.
Normally each DVD has its own menu. Here you can choose chapters,
make settings, etc. This menu is specic for the DVD and can thus not be
explained in detail.
Press the MENU button (Fig. 3/9) to access the DVD-menu. Use the Cur-
sor Buttons (Fig. 3/24) to navigate in the Menu. Press the ENTER button
(Fig. 3/14) to conrm.
If you are in a menu area for direct chapter selection, you can enter the
number of this chapter with the Numerical Buttons (Fig. 3/30) on the
remote control.
The DVD-Player has a fast forward and a fast reverse feature.
1. Press the  F.FWD (Fig. 3/18) or  F.RWD button (Fig. 3/19) to start
fast forward or fast reverse. The current replay direction and the
speed, e.g. “ x2“ is now displayed on screen.
2. Press the  or  button several times in order to change the speed.
The speed can be accelerated by factor 2, 4, 8 or 16.
3. Press the “PLAY/PAUSE“ button (Fig. 3/15) to restart the “normal”
replay when the desired section is reached.
You can change the screen section when viewing DVDs or images.
Press the ZOOM button (Fig. 3/6) to change the screen section. Press the
button several times to select the suitable zoom factor or to return to the
original zoom factor.
 NOTE:
With the cursor buttons (Fig. 3/24) you can move through the zoomed
image.
Some DVDs oer the possibility to select the viewing angle.
Press the ANGLE button (Fig. 3/27) to change the viewing angle.
 NOTE:
If changing the Viewing Angle is not possible, the message will be
displayed “
1/1“.