Operation Manual

English
44
Using a USB medium
Selecting le/directory and
starting replay
By means of the USB connection you can connect numerous devices to
the DVD Player.
This device has been developed in accordance with the latest technical
developments in the USB eld. Unfortunately the large number of dif-
ferent types of USB storage media on oer today makes it impossible to
guarantee full compatibility with all USB storage media. For this reason
there may be problems in rare cases with playing back from USB storage
media. This is not a malfunction of the device.
1. Insert a USB storage medium directly into the corresponding con-
nection of the DVD player (Fig. 1/9).
2. Press the STOP (Fig. 3/23) button.
3. Press the DVD/USB button (Fig. 3/16) on the remote control in order
to turn the DVD player to the le mode.
 NOTE:
The SOURCE menu can only be called up in stop mode.
4. Use the Cursor Buttons (Fig. 3/24) to select “USB“ mode. Conrm
with the ENTER (Fig. 3/14) button.
 NOTE:
In order to nd out which les can be played back the DVD player
now reads the contents of the storage medium. In the case of large
storage media this procedure may take a long time.
5. Select the desired le(s) und start playback ï Page 44, “Selecting
le/directory and starting playback“.
6. If you would like to change back to DVD mode, press the DVD/USB
button (Fig. 3/16) again. Use the Cursor Buttons (Fig. 3/24) to select
the “DISC“ mode. Conrm with the ENTER (Fig. 3/14) button.
Media may contain numerous data/les and directories. You must there-
fore rst determine the data to be played.
1. Place the CD or DVD in the drive if you have not already done so.
2. A two-column menu window appears in which the directories (if
there are any directories present) or the les are listed on the left.
3. Use the Cursor buttons (Fig. 3/24) to select the desired directory of
le in the left-hand list.
4. Select this by pressing the “ENTER“ button (Fig. 3/14).
File: Once you have selected a le, this is now displayed directly or
played back.
Directory: If you have called up a directory, a list of les now opens.
Here too you can select the desired le with the Cursor buttons and
the ENTER button (Fig. 3/14). If you have selected a le, this is now
displayed or played back.
Please note:
There are both lots of burning and compressing methods as well as high
quality dierences in CDs/DVDs and burned CDs/DVDs.
For this reason there may occasionally be problems when les are played
back (for example les are displayed but cannot be played back). This is
no malfunction of the player.