Instruction manual

English

Connect to Other Devices

Connect Other Playback Devices

Connect an AV cable to AV (Fig. 2/5) and to the playback device to

view images of another playback device (such as digital camera).

Connect the AC adapter cable to the DC IN connector (Fig. 2/5).

Connect the AC adapter to a properly installed plug socket.

NOTE:

Other devices can only be connected to the LCD Monitor (slave moni-

tor).

Digital Audio Transmission

Connect a coaxial cable (not included) to transmit the digital audit signal

to your playback unit or your ampliﬁer.

1. Plug the Audio plug into the COAXIAL socket of the DVD monitor

(Fig. 1/13).

2. Insert the audio plug into the corresponding socket of your playback

unit or your ampliﬁer.

Connect TV Set

Connect an A/V cable to AV OUT (Fig. 1/14) and to the TV set to view

images on the TV set.

Switch the TV set to AV IN. Observe the TV’s user manual.

NOTE:

You need an audio cable with a 4-pin 3.5 mm jack plug to cinch socket,

with a pin length of 17.5 mm.

LCD Monitor - Change Display Settings

Press the

MODE button (Fig. 2/8), to display the Setup menu.

Use the

and (Fig. 2/9) buttons to select the option. Use the and

(Fig. 2/7) buttons to change the setting.

Press the

MODE button repeatedly to toggle between the Picture

and Options menu or to hide the menu.

NOTE:

The menu hides itself automatically after a short time if no setting has

been changed.

Picture

You can set the brightness, the contrast and the color in the menu. Use

“Reset” to reset all settings to the default value.