Operation Manual

English
49
Video Setup
Preference Setup
In menu item Channel Delay you adjust the audio signal output to the
speaker placement.
In menu item Equalizer you nd alternatives to adjust the audio output
to your listening habits or favorite music style (e.g. Bass or Treble Boost,
e.g. Rock, Jazz).
In menu item 3D Processing you nd further alternatives to adjust the
audio output (ProLogic II, dierent three-dimensionalities).
Menu item HDCD oers a variety of sound lters.
Press SETUP (6) on the remote control. 
The main menu is displayed and the General Setup Menu icon is high-
lighted.
Repeatedly press  (8) until Video Setup is displayed.
Press  (8) to highlight a menu item.
Press  (8) to access the respective submenu.
Press  , (8) and ENTER (7) to select the desired setting.
In menu item Video Output you select the video signal output: S-Video,
YUV (component video) or RGB (composite video).
This menu item is only available if the HDMI port is not connected.
In menu item Video Setup you adjust the values for Sharpness and
Gamma.
In menu item Resolution you set the screen resolution. This menu item
is only available if the unit is connected via the HDMI connector (21) to
a TV set.
Press SETUP (6) on the remote control. 
The main menu is displayed and the General Setup Menu icon is high-
lighted.
Repeatedly press  (8) until Preference Setup is displayed.
Press  (8) to highlight a menu item.
Press  (8) to access the respective submenu.
Press  , (8) and ENTER (7) to select the desired setting.
In menu item TV Type you adjust the color system of your TV Set: PAL,
NTSC or Auto.