Operation Manual

English
60
Fig. 1/6
Switching on the receiver
Fig. 2/11
Microphone Input
If you would like to use the DVD player for karaoke, please insert a
microphone into the corresponding socket.
Turn on the main switch of the DVD player by moving the „POWER“ on/
o switch on the back of the device to „ON“. If the device is then in
standby mode, press the STANDBY button on the device (Fig. 1/1) or on
the remote control (Fig. 3/34) in order to switch the device on.
About the DVD-Player
With this DVD-Player you can play a vast variety of DVD-formats
➯ Page 48, „Technical data“.
However, you must be aware that in many cases DVDs are encrypted
with a so-called “Regional Code”. This speci es for which region in
the world the DVD is intended. As an example, the DVDs marked with
regional code “1” are intended for the USA and Canada. DVDs with
regional code “2” are for use in Europe.
 NOTE:
With your DVD-Player you can only play DVDs with regional code
“2”. There are both lots of burning and compressing methods as
well as high quality di erences in (burned) CDs/DVDs. Moreover,
the music industry has not yet agreed on a  xed standard for copy
protection. This may, in very isolated cases, result in problems when
relaying CDs, DVDs and MP3 CDs. This is no malfunction of the
player.
Furthermore, there may be isolated problems when playing CDs or DVDs
which were created on a PC (e.g. holiday photographs). In case of prob-
lems check the settings of the DVD writing program on your computer.
You should in particular make sure that the DVD has been  nalized. For
further information on this matter please refer to the operating manual
of your recorder.
Input Not Possible
If a function or input selected by you is not possible, the adjacent sym-
bol is shown on the screen.
05_DVD 4625 HC AEG - GB.indd 6005_DVD 4625 HC AEG - GB.indd 60 24.06.2010 16:48:52 Uhr24.06.2010 16:48:52 Uhr