Operation Manual
English
69
Understanding
the menu structure
Using the menu
Overview of the main menu
NOTE:
Many of these default settings can be changed via both the remote
control and the menu. The di erence is: If you change the default
settings via the remote control, these changes will only be valid until
the DVD-Player is switched o or the DVD is changed.
However, any changes made in the menu are permanent.
The Setup menu has two menu levels:
Main menu: The main level is shown at the top edge of the screen
by means of generic terms.
Sub-menu: The corresponding sub-menu options can be found
under each of the main menu options.
Navigation and selection
Use the Cursor Buttons (Fig. 3/13) ( / ) on the remote control to
browse through the main menu.
In contrast to this, you must use the Cursor Buttons (/) to move
in the sub-menu.
Select a menu option with the ENTER-button (Fig. 3/25).
Use the ENTER-button also to select an option (e.g. “PAL” in the
illustration on the left). The selected option (in the example „PAL”) is
now highlighted.
To return to the submenu or main menu, press the Cursor Button .
Slide control
In some menus you will nd slide controls with which you can adjust the
volume or picture brightness, for example. The slide control is used as
follows:
1. Select with the ENTER-button.
2. Move the control with the Cursor Buttons (/).
3. Con rm the entry with the ENTER-button.
GENERAL = General Setup
AUDIO = Audio Setup Page
DOLBY = Digital Setup Page
VIDEO = Video Setup Page
PREFERENCE = Preference Page
NOTE:
Some of the menu settings are only available in stop mode (depending
on the DVD).
05_DVD 4625 HC AEG - GB.indd 6905_DVD 4625 HC AEG - GB.indd 69 24.06.2010 16:48:55 Uhr24.06.2010 16:48:55 Uhr