Operation Manual

English
71
Audio Setup
Screen saver
The player is able to display a still image for any time on the screen. This
can cause damage to the screen. It is therefore recommended to activate
the screen saver.
The following options are available:
 On: The screen saver is activated (default setting).
 O : The screen saver is deactivated.
HDCD
It is possible to play back HDCD-encoded CDs and DVDs with this device.
With the „HDCD“ function you can then listen to high-quality sound
with a greater degree of detail. Generally speaking, the greater the level
of HDCD  ltering, the better the quality of the sound.
Last Memory
This feature activates the recognition function of the DVD player.
 On: if the device is switched o during playback, or if the DVD is
changed, the device stores the position at which playback was inter-
rupted.
 O : playback begins again at the beginning of the medium.
 NOTE: This feature is not supported by all DVDs.
Analog Audio Setup
Downmix
Change the characteristics of the speaker output:
 LT/RT: Choose this setting if you want to play the DVD with the Pro
Logic Dolby stereo e ect. This produces a almost real 2-channel
replay e ect.
 Stereo: Choose this setting if you want to play a DVD, that has been
produced in the 5.1-Audio format, as 2-channel stereo sound.
 3D SURROUND: You may probably not have a 5.1-Audio system.
In this case you can use the „3D SURROUND“-setting to simulate a
similar sound e ect.
 5.1 CH: Select this setting to transmit the Audio signal to the output
device without changes.
05_DVD 4625 HC AEG - GB.indd 7105_DVD 4625 HC AEG - GB.indd 71 24.06.2010 16:48:56 Uhr24.06.2010 16:48:56 Uhr