Operation Manual

English
76
Preference Page
 NOTE:
 If you would like to select the „RGB“ setting, please ensure that
your playback device supports this setting.
 By pressing the V-MODE button (Fig. 3/6) you can also switch
between the video output options.
Resolution
Select the HDMI resolution for the connected playback device that is
to be used. Choosing the right signal format depends on the type of
connection and the playback device (see also the operating manual of
the replay unit).
Color Setting (Video Setup)
In this menu it is possible to perform various settings to adapt the video
signal.
HDMI Setup
HDMI
Here you can switch the HDMI output on and o .
TV Type
Match the output of the DVD-Player to the colour transfer system of
your playback device.
The following options are available:
 PAL: A system commonly used in Europe.
 AUTO: Select this setting if your playback device is a multi-system
unit.
 NTSC: A system primarily used in North America.
05_DVD 4625 HC AEG - GB.indd 7605_DVD 4625 HC AEG - GB.indd 76 24.06.2010 16:48:59 Uhr24.06.2010 16:48:59 Uhr